It-7 Series, Customizable Infitech Industrial Spray Booth Plant Drying Oven Paint Cabin Paint Booths Line

• Customization: Available
• After-sales Service: 24 Hours After Service
• Warranty: 2 Years
• Model NO.: IT-7 series, customizable
• Type: Spray Booth
• Certification: CE
• Substrate: Steel
• Brand: Infitech
• Coating: Powder Coating
• Airflow Direction: Rear Semi Downdraft
• Heating Mode: Diesel
• Paint Mist Treatment: Dry-type
• Condition: New
• Empty Loaded Air Speed: +/- 0.45m/S
• Fan Capacity: 18000m3/H
• Brightness: >1000lux
• Transport Package: Polyfoam and Metal Frame
• Specification: 8000 X 4000 X 2800mm (L X W X H)
• Trademark: INFITECH
• Origin: China
• HS Code: 8419899090
• Production Capacity: 300 Sets Per Year

Product Description

Infitech Industrial Spray Booth Drying Oven Paint Cabin Paint Booths

Specifications

Infitech Industrial Spray Booth Drying Oven Paint Cabin Paint Booths
STANDARD DESIGN	AS/NZS 4114.1:2003
BOOTH DIMENSIONS
Internal dimensions	8000 X 4000 X 2800mm (L X W X H)
External dimensions	10170 X 4110 X 3460mm (L X W X H)
BASEMENT
Basement design	No basement, with rear air extraction plenums
Air extraction type	Rear semi down draft extraction type
Air extraction plenum description	Frame structure, size: 2000 X1200 X 660mm
Filtration area	4.8m^2
CABIN
Cabin structure	Wall panel vertical insert
Plenum height	600mm
WALL PANEL
Wall panel	50mm dual-skin insulated panels filled with heat resistant rock wool
Top material	50mm dual-skin insulated panels filled with heat resistant rock wool
Edge material	1.2mm galvanized plate bending forming
ENTRANCE DOOR
Form	Manual door, 3 wing entry door (2 + 1 structure)
Size	3200 X 2700 mm (W X H)
Quantity	Product entry door, 1 set
Door description	Containing frame, with safety glass observation window
PERSONNEL DOOR
Form	Frame structure
Size	800 X 2000 mm (W X H)
Quantity	3 sets
Door description	With safety glass observation window
SIDEWALL LIGHTING	(Accessible from outside the booth)
Quantity and power	10 sets of light fixtures, each 2 X 18W, total 360W
Lighting arrangement	On both sides
Lighting description	Protection grade IP55, CE certified
CEILING LIGHTING	(Accessible from outside the booth)
Quantity and power	10 sets of light fixtures, each 4 X18W, total 720W
Lighting arrangement	On both sides
Lighting description	Protection grade IP55, CE certified
Brightness	> 1000Lux
FILTRATION SYSTEM
Pre-filter	G3 grade pre-filter bag filter
Ceiling filter	F5 class filter cotton, Model SP-600G
Floor filter	Pleated andreae filter + Fiberglass paint arrestor filters
Exhaust filter	Fiberglass paint arrestor filters
INTAKE SYSTEM
Intake fan	Direct-type turbine fan
Intake fan power and motor description	5.5KW, 970rpm, 380V, 50Hz, SIEMENS
Parameter of intake fan	18000m^3/h, 650pa
EXHAUST SYSTEM
Exhaust fan	Direct-type turbine fan
Exhaust fan power and motor description	5.5KW, 970rpm, 380V, 50Hz, SIEMENS
Parameter of exhaust fan	18,000m^3/h, 650pa
Equipment empty loaded air speed	+/- 0.45m/s
NOISE	<78db
Manual damper	1 piece
Electric damper	1 piece
CONTROL SYSTEM
Implementation standards	Standard Y/Δ Drop Starting Control System
PLC programmable logic controller	PLC control, higher reliability, lower failure rate
Pressure detection	Pressure gauge indicates pressure inside the booth.
Features	Painting, levelling, lighting, emergency stop switch, failure indication
SPECIAL ITEM	Rated power:12.5KW

 

Mixing Room
STANDARD DESIGN	AS/NZS 4114.1:2003
BOOTH DIMENSIONS
Internal dimensions	8900 X 2500 X 2800mm (L X W X H)
External dimensions	9010 X 2610 X 2850mm (L X W X H)
WALL PANEL
Wall panel	50mm dual-skin insulated panels filled with heat resistant rock wool
Top material	50mm dual-skin insulated panels filled with heat resistant rock wool
Edge material	1.2mm galvanized plate bending forming
OBSERVATION WINDOW
Size	300 X 1100mm (W×H)
Quantity	4 sets
Window description	5mm thick; Tempered glass
PERSONNEL DOOR
Form	Frame structure
Size	800 X 2000 mm (W×H)
Quantity	2 sets
Door description	With safety glass observation window
CEILING LIGHTING	(Accessible from outside the booth)
Quantity and power	4 sets of light fixtures, each 4 X 18W, total 288W
Lighting description	Protection grade IP55, CE certified
Brightness	> 650Lux
FILTRATION SYSTEM
Pre-filter	Plate type fiberglass filters
VENTILATION SYSTEM
Direct drive motor (Exhaust Air)	1 X 1.5KW, 1450RPM, 380V, 50HZ, SIEMENS
Parameter of exhaust fan	5,000m³/h
SPECIAL ITEM	Rated power:2KW

 

Drying Room
STANDARD DESIGN	AS/NZS 4114.1:2003
BOOTH DIMENSIONS
Internal dimensions	8050 X 9000 X 2800mm (L X W X H)
External dimensions	8110 X 9000 X 3460mm (L X W X H)
WALL PANEL
Wall panel	50mm dual-skin insulated panels filled with heat resistant rock wool
Top material	50mm dual-skin insulated panels filled with heat resistant rock wool
Edge material	1.2mm galvanized plate bending forming
PLATE ROLL UP DOOR
Door size	4000 x 2800mm(BxH)
Quantity	2 sets
Door description	Door filled with polyurethane foam, with reinforced ribs; With observation window; Anti-crash protection device: intelligent wireless airbag anti-pressure sensor, when the bottom edge contacts obstacles, the door immediately moves in opposite direction, which provides safety protection for vehicles below the door; Anti-sagging device: when the drive mechanism fails, the safety protection device will block the door automatically, preventing the door from falling down.
CEILING ANGLED LIGHTING	(Accessible from outside the booth)
Quantity and power	10 sets of light fixtures, each 4X18W, total 720W
Lighting arrangement	On both sides
CEILING LIGHTING	(Accessible from outside the booth)
Quantity and power	6 sets of light fixtures, each 2X18W, total 216W
Lighting arrangement	Distributed evenly at the ceiling
Lighting description	Protection grade IP55, CE certified
Brightness	>250Lux
FILTRATION SYSTEM
Pre-filter	Plate type fiberglass filters
VENTILATION SYSTEM	(FOR WASTE GAS)
Direct drive motor (Exhaust Air)	1×1.5KW, 1450RPM, 380V, 50HZ, SIEMENS
Parameter of exhaust fan	5000m³/h
SPECIAL ITEM	Rated power:3KW

 

Sanding Room
STANDARD DESIGN	AS/NZS 4114.1:2003
BOOTH DIMENSIONS
Internal dimensions	4290 X 7000 X 2800mm (L X W X H)
External dimensions	5000 X 7100 X 3460mm (L X W X H)
FOUNDATION AND FLOOR
Foundation	Without metal foundation, with air extraction plenum chambers installed at rear wall of the cabin
Filtration area	3.5 m²
WALL PANEL
Wall panel	50mm dual-skin insulated panels filled with heat resistant rock wool
Top material	50mm dual-skin insulated panels filled with heat resistant rock wool
Edge material	1.2mm galvanized plate bending forming
ELECTRIC CURTAIN DOOR
Form	Electric drive
Size	5800 X 2650 mm (W X H)
Quantity	1 set
Door description	-Three sessions, the middle part is transparent, the upper and bottom part is gray, rising speed is 0.2m /s; Can be controlled internally and externally; - Anti-flaming cloth, tidy, compressed, good sealing effect
CEILING LIGHTING	(Accessible from outside the booth)
Quantity and power	9 sets of light fixtures, each 4 X18W, total 648W
Lighting arrangement	Distributed evenly at the ceiling
Lighting description	Protection grade IP55, CE certified
Brightness	>800Lux
FILTRATION SYSTEM
Bottom filter & exhaust filter	Pleated andreae filter + Fibreglass paint arrestor filter
VENTILATION SYSTEM
Direct drive motor (Exhaust Air)	2 X 1.5KW, 1450RPM, 380V, 50HZ, SIEMENS
Parameters of exhaust fan	10,000m³/h
ELECTRIC CONTROL CABINET	- Fan start, emergency stop switch, failure indication; - Lighting switch; - 1x380V16A explosion-proof power supply; 2x 220V explosion-proof power supply; - 2 compressed air connectors, configure the gauge, regulator valve; - TOOL CABINET, easy job material storage, sorting, provide efficiency;
SPECIAL ITEM	Rated power:3KW

 

Company introduction

Guangzhou Infitech Mechanical and Electrical Equipment Co., Ltd. is the professional manufacturer of coating equipment.
Products include:
- Spray booth
- Spray line
- Preparation bay
-  Mixing room
-  Sandblasting booth
-  Powder coating booth
-  Vacuum dry sanding system

Our factory and office covers an area of 10,000 square meters. We have state-of-the-art production equipment to ensure the workmanship of our products.
We have abundant experience in the spray booth industry, and we are especially pride ourselves in delivering superior customized spray booth projects at favorable price. Our product and service enjoy a good reputation among our customers from home and abroad.


Facilities
We have state-of-the-art production equipment to ensure the workmanship of our products.


Exhibition

Packing and loading:


Welcome to contact us.