| After-sales Service: | 24 Hours After Service |
|---|---|
| Warranty: | 2 Years |
| Type: | Spray Booth |
| Certification: | CCC, CE |
| Substrate: | Steel |
| Brand: | Infitech |
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier 
| DESIGN STANDARD | BS EN 13355 BS EN 60204 |
| BOOTH DIMENSIONS | |
| Internal dimensions | 7000 X 4500 X 2800mm (L X WX H) |
| External dimensions | 7110 X 6060 X 3810mm (L X W X H) |
| BASEMENT | |
| Base design | Galvanized sheet bending forming, full grids Basement(H): 300mm and can be adjustable |
| Carrying capacity of the grids | 650 kg/wheel |
| Filter area | 28m2 |
| Drive-in-ramps | 3 pieces; size: 2000 X 1030 X 320mm, diamond structure |
| Grid description | Size: 997 X 756mm, 40 X 3mm, galvanized pressed steel grates instead of conventional steel grates with twisted bars. Aesthetics, durability, stress resistance are the most important features of pressed steel grates. |
| CABIN | |
| Cabin structure | Wall panel vertical insert |
| Plenum height | 600mm |
| WALL PANEL | |
| Wall panel | 50mm dual-skin insulated panels filled with heat resistant rock wool |
| Top panel | 50mm dual-skin insulated panels filled with heat resistant rock wool |
| Edge material | 1.2mm galvanized steel plate bending forming |
| ENTRANCE DOOR | |
| Form | Manual door, 4 wing entry door (2 + 2 structure) |
| Size | 3400 X 2700mm (W X H) |
| Quantity | Product entry door, 1 set |
| Door description | Containing frame, with safety glass observation window |
| PERSONNEL DOOR | |
| Form | Frame structure |
| Size | 800 X 2000 mm (W X H) |
| Quantity | 1 set |
| Door description | With safety glass observation window |
| SIDEWALL LIGHTING | (LED lamp) |
| Quantity and power | 6 sets of light fixtures, each 2 X 24W |
| Lighting arrangement | On both sides |
| Lighting description | Protection grade IP55 |
| CEILING LIGHTING | (LED lamp) |
| Quantity and power | 8 sets of light fixtures, each 6 X 24W |
| Lighting arrangement | On both sides |
| Lighting description | Protection grade IP55 |
| Brightness | > 1000Lux |
| FILTRATION SYSTEM | |
| Pre-filtration | EU3 grade pre-filter bag filter |
| Ceiling filter | F5 class filter cotton, Model SP-600G |
| Floor filtration | Fiberglass paint arrestor filters |
| Extract filtration | Simple activated carbon filter mat, M type |
| INTAKE SYSTEM | |
| Intake fan | Direct-type turbine fan |
| Power and motor description | 7.5KW, 970rpm, 380V, 50Hz, SIEMENS |
| Parameter of intake fan | 28,000m3/h, 650pa |
| EXHAUST SYSTEM | |
| Exhaust fan | Direct-type turbine fan |
| Power and motor description | 7.5KW, 970rpm, 380V, 50Hz, SIEMENS |
| Parameter of exhaust fan | 28,000m3/h, 650pa |
| Empty loaded air speed | +/- 0.25m/s |
| NOISE | <78db |
| HEATING SYSTEM | |
| Heat exchanger material | Stainless steel 1Gr18Ni9Ti(SUS304) |
| Heat exchanger power | 232KW |
| △ T temperature increase capability | 25° C (from -5°C to 20°C in painting phase) |
| Max. working temperature | 80°C |
| Heating time | 8-15 minutes (from 20°C to 60°C in baking phase) |
| Diesel burner | RIELLO diesel burner RG5D |
| DUCTWORK | |
| Straight ducting | 8 pieces |
| 90°elbow | 1 piece |
| 45°elbow | 1 piece |
| Rain hat | 1 piece |
| Reducer | 2 pieces |
| MANUAL DAMPER | 1 piece |
| ELECTRIC DAMPER | 1 piece |
| CONTROL SYSTEM | |
| Implementation standard | Standard Y/Δ step-down start control system |
| PLC programmable logic controller | PLC control, higher reliability, lower failure rate |
| Pressure detection | Pressure gauge indicates pressure inside the booth. |
| Features | Painting, heating painting, flash-off, baking, lighting, emergency stop switch, failure indication, over-temperature alarm indication, baking delay stop protection, motor overload and over-current protection, fan and heating system interlock |
| SPECIAL ITEM | Rated power:18KW |
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}