| Customization: | Available |
|---|---|
| After-sales Service: | 24 Hours After Service |
| Warranty: | 2 Years |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| BOOTH DIMENSIONS | Car spray paint booth |
| Internal dimensions | 6900×4000×2650 mm (L*W*H) |
| External dimensions | 7010×5410×3410 mm (L*W*H) |
| BASEMENT | |
| Base design | Made of galvanized steel sheet Full grids, Basement(H): 300mm, spray booth with inner ramps |
| Carrying capacity of the grids | 650kg/wheel |
| Filter area | 28m2 |
| Drive-in-ramps | Inner ramps, grilles |
| Grid description | Grids:30x4 mm steel grates with twisted bars, spacing of twisted steel is 100mm. |
| CABIN | |
| Cabin structure | Vertical wall panel |
| Plenum height | 400mm |
| Ceiling filter design | Made of galvanized steel sheet, C sharp groove structure |
| WALL PANEL | |
| Wall panel | 50mm dual-skin insulated panels filled with heat resistant rock wool substrate thickness: 0.426mm |
| Top panel | Single-layer galvanized steel plate bending forming |
| Profile material | 1.0mm color steel plate bending forming |
| ENTRANCE DOOR | |
| Form | Manual door, 4-wing entry door ("2 + 2" structure) |
| Size | 3400×2700 mm(W*H) |
| Quantity and arrangement | Product entry door, 1 set |
| Door description | Containing frame, with safety glass observation window |
| PERSONNEL DOOR | |
| Form | Frame structure |
| Size | 800×2000 mm(W×H) |
| Quantity | 1 set |
| Door description | With safety glass observation window |
| CEILING LIGHTING | |
| Quantity and power | 8 sets of light fixtures, each 4 x 24W, 768W total |
| Lighting arrangement | On both sides |
| Lighting description | LED lamp, protection grade IP54 |
| Brightness | >1000Lux |
| FILTRATION SYSTEM | |
| Pre-filtration | G3 grade pre-filter plate filter |
| Ceiling filter | F5 class filter cotton, Model SP-600G |
| Floor filtration | Fiberglass paint arrestor filters |
| Exhaust filter | Simple activated carbon filter mat, M type |
| INTAKE SYSTEM | |
| Intake fan | Direct-type turbine fan |
| Power and motor description | 5.5KW, 970rpm, 380V, 50Hz, CE approved motor |
| Parameter of intake fan | 18,000m3/h, 600pa |
| EXHAUST SYSTEM | |
| Exhaust fan | Direct-type turbine fan |
| Power and motor description | 5.5KW, 970rpm, 380V, 50Hz, CE certified motor |
| Parameter of exhaust fan | 18,000m3/h, 600pa |
| Empty loaded air speed | +/- 0.28m/s |
| NOISE | <78dB |
| HEATING SYSTEM | |
| Heating form | Auto spray booth with infrared heating |
| Power and quantity | 30KW |
| Max. working temperature | 80° C |
| DUCTWORK | |
| Straight ducting | 4 pcs, for air outlet |
| 90° elbow | 1 pc, for air outlet |
| 45°elbow | 1 pc, for air outlet |
| Reducer | 1 pc |
| CONTROL SYSTEM | |
| Implementation standard | The car spray booth with direct start. |
| PLC programmable logic controller | spray booth with PLC control, higher reliability, lower failure rate |
| Touch screen control system | User friendly interface featuring touch screen and switches, easy to operate |
| Features | Painting, baking, lighting, emergency stop switch, motor over-load and over-current protection |
| RATED POWER | 43KW |
| OPTION | 1, EPS wall panel instead of the rock wool panel 2, Remove the exhaust system |
){kind=link}