Customization: | Available |
---|---|
Warranty: | 2 Years |
Type: | Coating Production Line |
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
DESIGN STANDARD | BS EN 13355: 2004 + A1: 2009 BS EN 60204: 2006 + A1: 2009 |
BOOTH DIMENSIONS | |
Internal dimensions | 15000 X 5000 X 5000mm (L X WX H) |
External dimensions | 15170 X 8320 X 5800mm (L X WX H) |
BASEMENT | |
Basement design type | No base, with two rows of air exhaust plenums |
Air extraction type | Side down draft extraction type |
Air exhaust plenums | Frame structure, size: 9000 × 660 ×1200mm (L×B×H) |
Filtration area | 21.6m2 |
CABIN | |
Cabin structure | 80 x80 3.0 thick square tube frame, gantry structure Wall panel horizontal insert |
Plenum height | 800mm |
WALL PANEL | |
Wall panel | 60mm dual-skin insulated panels filled with heat resistant rock wool |
Top material | 50mm dual-skin insulated panels filled with heat resistant rock wool |
Edge material | 1.2mm galvanized plate bending forming |
ENTRANCE DOOR | |
Form | Manual door, 4 wing entry door (3+1 structure) |
Size | 4270 X 4800mm (W X H) |
Quantity | Product entry door, 1 set |
Door description | Containing frame, with safety glass observation window |
PERSONNEL DOOR | |
Form | Frame structure |
Size | 800×2000 mm (W×H) |
Quantity | 2 sets ***4 sets as optional |
Door description | With safety glass observation windows |
SIDEWALL LIGHTING | (LED lamp) |
Quantity and power | 18 sets of light fixtures, each 4 X 18W, total 1296W |
Lighting arrangement | On both sides |
Lighting description | Protection grade IP55 |
CEILING LIGHTING | (LED lamp) |
Quantity and power | 20 sets of light fixtures, each 4 X 18W, total 1440W |
Lighting arrangement | On both sides |
Lighting description | Protection grade IP55 |
Brightness | > 1000Lux |
FILTRATION SYSTEM | |
Pre-filtration | G3 grade pre-filter bag filter |
Ceiling filter | F5 class filter cotton, Model SP-600G |
Floor filtration | Pleated andreae filters + Fiberglass paint arrestor filters |
Exhaust filtration | Activated carbon filter mat, M style |
INTAKE SYSTEM | |
Intake fan | Direct-type turbine fan |
Intake fan power and motor description | 2 X11KW, 970rpm, 380V, 50Hz, CE |
Parameter of intake fan | 2 X 35,000m3/h, 650pa |
EXHAUST SYSTEM | |
Exhaust fan | Direct-type turbine fan |
Exhaust fan power and motor description | 2X11KW, 970rpm, 380V, 50Hz, CE |
Parameter of exhaust fan | 2 X 35,000m3/h, 650pa |
Equipment empty loaded air speed | +/- 0.26m/s |
NOISE | <78db |
HEATING SYSTEM | |
Heating exchanger material | Stainless steel 1Gr18Ni9Ti(SUS304) |
Heating exchanger capacity | 2 X 232KW(340.000Kcal/H) |
△T temperature increase ability | 25° C (from -5°C to 20°C, in painting phase) |
Maximum working temperature | 80° C |
Burner Model | RIELLO RG5D X 2 |
Heating Time | 10-18 minutes (from 20° C to 60° C) in baking phase |
DUCTWORK | |
Straight ducting | 20 pieces |
Rain hat | 2 pieces |
90°elbow / 45°elbow | 2 pieces / 2 pieces |
Reducers | 4 pieces |
Manual damper/ Electric damper | 2 pieces/2 pieces |
CONTROL SYSTEM | |
Implementation standards | Standard Y/Δ drop starting control system |
PLC programmable logic controller | PLC control, higher reliability, lower failure rate |
Pressure detection | Pressure gauge indicates pressure inside the booth. |
Power distribution facilities | CE standard electric cable, terminal box, wiring tubes and accessories |
Features | Painting, heating painting, flash-off, baking, emergency stop switch, failure indication, baking delay stop protection, motor over-load and over-current protection, over-temperature alarm indication, fan and heating system interlock control |
OPTIONAL | |
|
It allows painter to reach all around the workpiece, greatly increase efficiency and save labor cost. |
|
Inverter control, energy-saving, more economical |
|
Touch screen control, easier to operate |
|
|
|
|
|
|
SPECIAL ITEM | Rated power: 50KW |
3 axis lifter with platform | |
Lifting Height | 3300mm from floor |
Travel distance | 14000mm |
Travel speed | 8m/min |
Dimension of the platform | 900 X 900mm |
Lifting height of the platform | 550~3300mm |
Speed of moving in and out | 3m/min |
Lifting capacity of the platform | 300KG |
Total power | 3KW |