| Customization: | Available |
|---|---|
| Type: | Spray Booth |
| Certification: | CE |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Design standard | BS EN 13355: 2004 + A1: 2009 BS EN 60204: 2006 + A1: 2009 |
| Internal dimensions | 7200 X 4000 X 3500mm (L X W X H) |
| External dimensions | 7310 X 5570 X 3960mm (L X W X H) |
| Base design | Full grids ***Customer needs to construct the pit for extraction. |
| Carrying capacity of the grids | 900kg /wheel |
| Filter area | 28.8m² |
| Plenum height | 400mm |
| Wall panel | 50mm dual-skin insulated panels filled with heat resistant rock wool |
| Top panel | Single layer galvanized steel plate bending forming |
| Entrance door | 1 set, 3200 X 3400 mm (W X H) |
| Personnel door | 1 set, 800 X 2000 mm (W×H) |
| Sidewall lighting | LED lamp, 8 sets of light fixtures, each 2 X 18W, 288W total |
| Ceiling lighting | LED lamp, 8 sets of light fixtures, each 4 X 18W, 576W total |
| Brightness | > 800Lux |
| Filtration system | Pre-filter, Ceiling filter, Floor filter, Exhaust filter |
| Intake/Exhaust system | 5.5KW, 970 rpm, 380V, 50 Hz, CE, 18,000 m3/h, 600pa |
| Empty loaded air speed | +/- 0.17m/s |
| Noise | <78 db |
| Heating system | Stainless steel 1Gr18Ni9Ti (SUS304), 158KW |
| Temperature increase capability | 25° C (from -5°C to 20°C, in painting phase) |
| Max. working temperature | 80° C |
| Heating time | 10-15 minutes (from 20°C to 60°C, in baking phase) |
| Burner model | RIELLO diesel burner G20 |
| Control system | -Start directly -Painting, heating painting, baking, lighting, emergency stop switch, failure indication, over-temperature alarm indication, motor over-load and over-current protection |
| Rated power | 13KW |
){kind=link}