Hot Water Heating Spraying Painting Booth for Furniture and Woodworking
1.FEATURES
The solution comes with 1 paint booth and 1 paint mixing room. It is specially designed for painting and drying carpentry.
The paint booth has rear semi downdraft airflow, manual sliding door, and air handling unit and heating unit installed at the top. The heating is hot water heating, which is environmental. Meanwhile, it is with heat recuperator, so the cold fresh air can be pre-heated to certain temperature by the heat of the waste gases, which helps save energy.
Please feel free to send your inquiries. We will prepare and provide you with the ideal paint booth solution that best suits your requirements for your review then.
2.SPECIFICATIONS
| Paint Spray Booth |
| ITEMS |
SPECIFICATIONS |
| Product |
IT-L8-W6 Carpentry Paint Booths |
| Design standard |
BS EN 13355: 2004 + A1: 2009
BS EN 60204: 2006 + A1: 2009 |
| Internal dimensions |
8000 X 6000 X 2650mm (L X W X H) |
| External dimensions |
8110 X 6720 X 4870mm (L X W X H) |
| Airflow |
Rear semi downdraft |
| Plenum (height) |
600mm |
| Extraction |
Through rear exhaust plenum chambers |
| Extraction area |
9.6m2 |
| Entrance door |
2000x2200mm (WxH), manual sliding door, 2 sets |
| Service door |
800x2000mm(WxH), 1 set |
| Walls |
50mm rock wool walls |
| Ceiling lights (LED) |
10 sets, each 6 X 18W, 1,080W total |
| Sidewall lights (LED) |
12 sets, each 2 X 18W, 432W total |
| Brightness |
>1,000LUX |
| Filters |
Bag filter, high efficiency ceiling filter, filter at exhaust plenum chambers, exhaust filter |
| Intake/Exhaust unit |
Direct-type turbine fan,2x7.5KW, SIEMENS motor |
| Air volume |
28,000m3/h |
| Empty loaded air speed |
0.16m/s |
| Heats |
Hot water heating system, power: 450KW |
| Maximum working temperature |
80ºC |
| Heat recuperator |
Yes. |
| Controls |
CE standard control box |
| Inverter |
World famous brand inverter |
| Special item |
Machinery mounted at the overhead steel platform |
| Rated power |
15KW |
3.DETAILS
Manual sliding door
- Slide door with durable rubber for airtight seal
- With tempered observation window on all doors
Air handling unit and heating unit
| Intake motor |
Exhaust motor |
Intake / Exhaust fan |
Air volume |
Drying system |
| 7.5KW SIEMENS |
7.5KW SIEMENS |
IT750 backward centrifugal fan,
direct linkage |
28,000m³/h |
Hot water heating |
The heat exchanger is made of copper pipe and aluminum sheet.
Heat exchanger power: 450KW
Air volume to be handled: 28,000m3/h
Intake air temperature: -10ºC
Outtake air temperature: 38ºC
Temperature of water at the hot-in port: 85ºC
Temperature of water at the hot-out port: 75ºC
Water flow: 38t/h
Heat recuperator
The heat recuperator is designed for spray booths used in cold areas. It makes full use of the heat of the waste gases to pre-heat the cold fresh air. This helps save energy consumption.
Cross flow heat exchanger core is made of antiseptic hydrophilic / epoxy coating aluminum foil and galvanized sheet cover. The air is forced to crossover through the heat exchanger core, two air streams (i.e. fresh air and exhaust air) never come into direct contact, avoid the transfer of any smell and moisture. It is usually being used for recovering energy at residential, commercial and wind-power industry ventilation systems.
Control
FAQ
Q: Can you also supply prep station for carpentry?
A: Certainly. Tell us your requirements. We will prepare and send you the corresponding solution for you to check.
Q: Is your paint booth CE compliance?
A: Yes.
Q: I need to integrate water curtain together with paint booth.
A: That's okay. Please send us the draft sketch of the equipment. We will design according to your requirements.
Q: Can you propose the right spray booth to me? I will send you the information of the products that I plan to paint.
A: Sure. For the information of the products, please advise the maximum dimensions, weight, and paints that you will use etc. Meanwhile, also send us the workshop layout for our reference.
Q: Can you supply cross draft spray booth?
A: Yes. It is available.
Q: Can you add hanging brackets to the paint booth?
A: That's okay. But you need to send us the maximum loading capacity for our reference.
Audited Supplier 
){kind=link}
){kind=link}