| Customization: | Available |
|---|---|
| After-sales Service: | 24 Hours After Service |
| Warranty: | 2 Years |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| DESIGN STANDARD | BS EN ISO 12100:2010, BS EN ISO 13355:2016 BS EN ISO 13849-1:2015, BS EN ISO 4414:2010 BS EN 60204-1:2018 |
| BOOTH DIMENSIONS | |
| Internal dimensions | 6900 X 4000 X 2800mm (L*W*H) |
| External dimensions | 7010 X 5570 X 3810mm (L*W*H) |
| BASEMENT | |
| Base design | Galvanized sheet bending forming, full grids Basement(H): 350mm, basement height can be adjusted |
| Carrying capacity of the grids | 800kg/wheel |
| Filter area | 28m2 |
| Drive-in-ramps | full ramps: 3 pieces; size: 2000 X 1030 X 330mm, diamond structure |
| Grid description | Size: 997 X 756mm, 40 X 3mm, galvanized pressed steel grates instead of conventional steel grates with twisted bars. Aesthetics, durability, stress resistance are the most important features of pressed steel grates. |
| CABIN | |
| Cabin structure | Wall panel vertical insert, left side with full glass. |
| Plenum height | 600mm |
| WALL PANEL | |
| Wall panel | 50mm dual-skin insulated panels filled with heat resistant rock wool substrate thickness: 0.426mm |
| Top panel | Single-layer galvanized steel plate bending forming |
| Edge material | 1.0mm galvanized steel plate bending forming |
| ENTRANCE DOOR | |
| Form | Manual door, 3 wing entry door (2 + 1 structure) |
| Size | 3200 X 2700mm (W*H) |
| Quantity | Product entry door, 1 set |
| Door description | Containing frame, with safety glass observation window |
| PERSONNEL DOOR | |
| Form | Frame structure |
| Size | 800 X 2000 mm (W*H) |
| Quantity | 1 set |
| Door description | With safety glass observation window |
| CEILING LIGHTING | |
| Quantity and power | 8 sets of light fixtures, each 6 X 24W, 1152W total |
| Lighting arrangement | On both sides |
| Lighting description | LED lamp, protection grade IP55 |
| SIDEWALL LIGHTING | without |
| Brightness | > 1,000Lux |
| FILTRATION SYSTEM | |
| Pre-filtration | G2 grade pre-filter bag filter |
| Ceiling filter | F5 class filter cotton, Model SP-600G |
| Floor filtration | Fiberglass paint arrestor filters |
| Extract filtration | Simple activated carbon filter mat, M type |
| INTAKE SYSTEM | |
| Intake fan | Direct-type turbine fan |
| Power and motor description | 7.5KW, 970rpm, 380V, 50Hz, CE approved motor |
| Parameter of intake fan | 28,000m3/h, 650pa |
| EXHAUST SYSTEM | |
| Exhaust fan | Direct-type turbine fan |
| Power and motor description | 7.5KW, 970rpm, 380V, 50Hz, CE approved motor |
| Parameter of exhaust fan | 28,000m3/h, 650pa |
| Empty loaded air speed | +/- 0.27m/s |
| NOISE | <78dB |
| HEATING SYSTEM | |
| Heat exchanger material | Stainless steel 1Gr18Ni9Ti(SUS304) |
| Heat exchanger power | 232KW |
| △ T temperature increase capability | 25° C (from -5°C to 20°C in painting phase) |
| Max. working temperature | 80°C |
| Heating time | 8-10 minutes (from 20°C to 60°C in baking phase) |
| Burner model | RIELLO diesel burner RG5D (two stage) |
| DUCTWORK | |
| Straight ducting | 8 pcs, 3 pcs for air inlet, 5 pcs for air outlet |
| 90°elbow | 2 pcs, for air inlet |
| Cowl | 1 pc, for air outlet |
| Reducer | 2 pcs |
| MANUAL DAMPER | 1 pc |
| ELECTRIC DAMPER | 1 pc |
| CONTROL SYSTEM | |
| Implementation standard | Standard Y/Δ step-down start control system |
| PLC programmable logic controller | PLC control, higher reliability, lower failure rate |
| Touch screen control system | User friendly interface featuring touch screen and switches, easy to operate |
| Pressure detection | Pressure gauge indicates pressure inside the booth. |
| Features | Painting, heating painting, flash-off, baking, lighting, emergency stop switch, failure indication, over-temperature alarm indication, motor overload and over-current protection, fan and heating system interlock, automatic constant pressure. |
| Stack light | 4 colors
|
| SPECIAL ITEM | Rated power: 20KW |
| OPTION | |
| SIEMENS motor | SIEMENS motor instead of the Chinese brand CE motor |
| Drive-in-ramps | 3 pieces; size: 2000 X 1030 X 330mm, diamond structure |
){kind=link}