| Customization: | Available |
|---|---|
| Type: | Spray Booth |
| Certification: | CE |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| DESIGN STANDARD | BS EN 13355: 2004 + A1: 2009 BS EN 60204: 2006 + A1: 2009 |
| BOOTH DIMENSIONS | |
| Internal dimensions | 6900 X 4000 X 2800mm (L X W X H) |
| External dimensions | 7005 X 5560 X 3610mm (L X W X H) |
| BASE | |
| Base design | Galvanized sheet bending forming, full grids Basement(H): 350mm, cannot be adjustable |
| Carrying capacity of the grids | 650kg /wheel |
| Filter area | 27.6m2 |
| Drive-in-ramp | 2 pieces; size: 2000 X 1030 X 320mm, diamond structure |
| Grid description | Size: 997 X 756mm, 40 X 3mm, galvanized pressed steel grates instead of conventional steel grates with twisted bars. Aesthetics, durability, stress resistance are the most important features of pressed steel grates. |
| CABIN | |
| Cabin structure | Wall panel vertical insert |
| Plenum height | 400mm |
| WALL PANEL | |
| Wall panel | 50mm dual-skin insulated panels filled with heat resistant rock wool |
| Top panel | Single layer galvanized steel plate bending forming |
| Edge material | 1.2mm galvanized steel plate bending forming |
| ENTRANCE DOOR | |
| Form | Manual door, 3 wing entry door (2 + 1 structure) |
| Size | 3200 X 2700 mm (W X H) |
| Quantity | Product entry door, 1 set |
| Door description | Containing frame, with safety glass observation window |
| PERSONNEL DOOR | |
| Form | Frame structure |
| Size | 800 X 2000 mm (W×H) |
| Quantity | 1 set |
| Door descriptions | With safety glass observation window |
| CEILING LIGHTING | (LED lamp) |
| Quantity and power | 8 sets of light fixtures, each 4 X 18W, 576W total |
| Lighting arrangement | On both sides |
| Lighting description | Protection grade IP55 |
| Brightness | > 800Lux |
| FILTRATION SYSTEM | |
| Pre-filter | G2 grade pre-filter plate filter |
| Ceiling filter | F5 class filter cotton, Model SP-600G |
| Floor filter | Fiberglass paint arrestor filters |
| Exhaust filter | Fiberglass paint arrestor filters, with features of big ventilation volume, small resistance and flame resistance, etc. |
| INTAKE SYSTEM | |
| Intake fan | Direct-type turbine fan |
| Power and motor description | 5.5KW, 970 rpm, 380V, 50 Hz, CE |
| Parameter of intake fan | 18,000 m3/h, 600pa |
| EXHAUST SYSTEM | |
| Exhaust fan | Direct-type turbine fan |
| Power and motor description | 5.5KW, 970 rpm, 380V, 50 Hz, CE |
| Parameter of exhaust fan | 18,000 m3/h, 600pa |
| Empty loaded air speed | +/- 0.18m/s |
| NOISE | <78 db |
| HEATING SYSTEM | |
| Heat exchanger material | Stainless steel 1Gr18Ni9Ti (SUS304) |
| Heat exchanger power | 158KW |
| △T temperature increase capability | 25° C (from -5°C to 20°C, in painting phase) |
| Max. working temperature | 80° C |
| Heating time | 10-15 minutes (from 20°C to 60°C, in baking phase) |
| Burner model | RIELLO diesel burner G20 |
| DUCTWORK | |
| Pipeline configuration | Straight ducting: 4 pieces; 90°: 1 piece; 45°: 1 piece; Reducer: 1 piece |
| Manual throttle exhaust | 1 piece |
| CONTROL SYSTEM | |
| Implementation standards | Start directly |
| Features | Painting, heating painting, baking, lighting, emergency stop switch, failure indication, over-temperature alarm indication, motor over-load and over-current protection |
| SPECIAL ITEM | Rated power: 13KW |
){kind=link}