Woodworking Painting Room and Drying Room with Manual Sliding Door

• Type: Spray Booth
• Certification: CE
• Substrate: Steel
• Coating: Powder Coating
• Airflow Direction: Rear Semi Downdraft
• Heating Mode: Hot Water Heating
• Model NO.: IT-CM-F
• Paint Mist Treatment: Dry-type
• Condition: New
• Airflow: Rear Semi Downdraft
• Extraction Area: 6m2
• Grids Carrying Capacity: 1,500kg/Wheel
• Brightness: >700lux
• Air Volume: 2*28,000m3/H
• Sectional Air Speed: 0.46m/S
• Heats: Hot Water Heating, 230kw
• Maximum Working: 80 Celsius
• Controls: CE Standard
• Inverter: Schneider
• Stack Light: Yes
• Rated Power: 15kw
• Transport Package: Cargo Loaded on Steel Frame Handled by Forklifts
• Specification: 3900 X 4000 X 2680mm (L X W X H)
• Trademark: INFITECH
• Origin: Guangzhou, China
• HS Code: 8419899090
• Production Capacity: 1000 Sets/Year

Product Description

Woodworking Painting Room and Drying Room with Manual Sliding Door
 

1.FEATURES

The woodworking spray booth comes with 1 spray booth for painting, and 1 drying booth for baking.
The spray booth has rear semi downdraft airflow, and it is equipped with water curtain system to deal with the paint mist, ideal for high painting volume.
The entry and exit door is manual sliding door. There is manual sliding door as divider between the spray booth and drying booth. After painting, the products can be transferred directly from the spray booth to the drying booth for drying.
The solution adopts hot water heating system, with high heat exchanger efficiency, and it is environmental. Certainly, we can change to use traditional diesel or gas heating for the booth.

2.SPECIFICATIONS

ITEMS	SPECIFICATIONS
Model	Customized Woodworking Spray Booth
Design standard	BS EN 13355: 2004+A1:2009 BS EN 60204: 2006+A1:2009
Internal dimensions	3900 X 4000 X 2680mm (L X W X H)
External dimensions	4010 X 4080 X 3480mm (L X W X H)
Airflow	Rear semi downdraft
Paint mist treatment	With water curtain to collect paint mist
Extraction area	6m^2
Entrance door	2000x2200mm (WxH), 1 set, manual sliding door With service door 800x2000mm in 1 door leaf
Walls	50mm rock wool walls, with observation window
Ceiling lights (LED)	4 sets, each 4 X 18W, 288W total
Brightness	>700LUX
Filters	Pre-filter, ceiling filter(F5 grade), exhaust filter (water curtain)
Intake unit	Belt drive fan unit, 10,000m^3/h 3KW CE motor
Water curtain	3000x1450x2330mm (LxWxH), made of stainless steel 7.5kw fan unit, 10,000m^3/h
Sectional air speed	0.46m/s
Heats	Hot water heating, 230KW
Controls	Painting, heating painting, lighting, emergency stop, failure indication
Rated power	15KW

 

ITEMS	SPECIFICATIONS
Model	Customized Woodworking Drying Booth
Design standard	BS EN 13355: 2004+A1:2009 BS EN 60204: 2006+A1:2009
Internal dimensions	5370 X 4000 X 2600mm (L X W X H)
External dimensions	5970 X 4080 X 2650mm (L X W X H)
Airflow	Rear semi downdraft
Exhaust plenums	4000x600x800mm (L X B X H)
Extraction area	3.2m^2
Entrance door	2000x2200mm (WxH), 1 set, manual sliding door
Divider door	1800x2200mm (WxH), 1 set, manual sliding door
Walls	50mm rock wool walls, with observation window
Ceiling lights (LED)	6 sets, each 4 X 18W, 432W total
Brightness	>800LUX
Filters	Pre-filter, ceiling filter(F5 grade), exhaust filter (fiberglass filter)
Circulating fan unit	Belt drive fan unit, 10,000m^3/h 3KW CE motor
Forced exhaust fan unit	Direct drive fan unit, 3,500m^3/h 1.5KW CE motor
Heats	Hot water heating, 230KW
Controls	Drying, lighting, emergency stop, failure indication
Rated power	6KW

3.DETAILS
 

• Design drawing

• Manual sliding entry door

1 set for spray booth, 1 set for drying booth, 1 set between spray booth and drying booth

• Water curtain system

1) Working principle
When the paint is sprayed on the component, the overspray is sucked rapidly by the exhaust fan. The paint mist is separated from the air and collected by the water-curtain. Moisture is removed from the exhaust air stream by the water eliminator, which prevents moisture from discharging at the exhaust port.
2) Composition
The filtration device consists of water supply system, water-curtain plate, water tank, water eliminator (for warding off water), exhaust fan etc.
The frame, water tank and water-curtain plate are made of stainless steel.
Adopts high pressure centrifugal pump, PVC pipes with good sealing and stable performance

Fan unit for spray booth:
1x3KW belt drive intake fan unit

Fan unit for drying booth:
1x3KW belt drive circulating fan unit & 1x1.5kw forced exhaust fan unit

All fan units are installed at the top of the booth.
 

Hot water heating unit
Material	Copper pipe and aluminum sheet
Heat exchanger power	230KW
Volume of air to be handled	10,000m^3/h
Intake air temperature	-5ºC
Outtake air temperature	63.5ºC
Temperature of water at the hot-in port	80ºC
Temperature of water at the hot-out port	60ºC
Water flow	10t/h

FAQ

Q: How do I know if the spray booth can fit my workshop?

A: Please send us your workshop layout. We will integrate our design to your workshop so we can check and make necessary changes if necessary.
 

Q: How do I decide if I take water wash treatment or dry filtration for my spray booth?

A: This can depend on many factors, but mainly the following ones.

The required production capacity

If the production capacity and painting volume is big, we recommend water treatment.

1. The local regulations for water wash treatment and dry filtration.
2. The convenience to deal with waste water and solid waste.
3. The budget for the project.Q: I need to put the machinery on the floor instead of at the top.

A: That's okay. We can meet your requirements.
 

Q: What is the warranty?

A: 2-year.
 

Q: I send you the maximum dimensions of the products that I plan to paint. Please propose the appropriate booth dimensions.

A: Yes. Meanwhile, if the workshop layout is available, please supply. So we can take it into consideration when working on the solution, and propose the ideal one to you.