Infitech Spray Booth/Spray Room/Garage Equipment/Paint Booth for Car Painting

• After-sales Service: 24 Hours After Service
• Warranty: 2 Years
• Type: Spray Booth
• Certification: CCC, CE
• Substrate: Steel
• Brand: Infitech
• Model NO.: IT-701
• Coating: Painting
• Airflow Direction: Fully Undershot-type
• Heating Mode: Diesel
• Paint Mist Treatment: Dry-type
• Condition: New
• Walls: 60mm Rock Wool Walls
• Brightness: >1,000lux
• Air Volume: 2*28,000m3/H
• Heats: Electric
• Noise: <78 dB
• Transport Package: Cargo Loaded on Steel Frame Handled by Forklifts
• Specification: 8000X4000X2800mm
• Trademark: INFITECH
• Origin: Guangzhou, China
• HS Code: 8419899090
• Production Capacity: 1, 000pieces/Year

Product Description

Auto Spray Booth Paint Booth Paint Spray Booth Painting Room
 

1.FEATURES

• DATE OF COMPLETION:SEPTEMBER,2021
• INTERNAL DIMENSION:8000X4000X2800MM
• MANUAL ENTRANCE DOOR, 4 WING ENTRY DOORS ("2+2"STRUCTURE), CONTAINING FRAME, WITH SAFETY GLASS OBSERVATION WINDOW;
• WITH 7.5KW INTAKE/EXHAUST FANS, 28000CMH, EMPTY LOADED AIRSPEED 0.27M/S;
• WITH INVERTER AND TOUCH SCREEN CONTROL SYSTEM.

2.Design
 

3.SPECIFICATIONS

ITEMS	SPECIFICATIONS
Model	IT-SUPER-701 Car Spray Painting Booth
Design standard	BS EN 13355: 2004+A1:2009 BS EN 60204: 2006+A1:2009
Internal dimensions	8000 X 4000 X 2800mm (L X W X H)
External dimensions	9570 X 4110 X 3460mm (L X W X H)
Airflow	Full Downdraft
Plenum (height)	600mm
Extraction	350mm basement sunken in the ground
Extraction area	28m^2
Grids carrying capacity	900kg/wheel
Entrance door	3400x2700mm (WxH), manual entry door, 1 set
Divider door	6000x2400mm (WxH), electric plate roll-up door, 1 set
Service door	800x2000mm(WxH), 1 set
Walls	60mm rock wool walls
Ceiling lights (LED)	8 sets, each 6 X 18W, 864W total
Sidewall lights (LED)	4 sets, each 2 X 18W, 144W total
Brightness	>1,000LUX
Filters	Bag filter, high efficiency ceiling filter, floor filter, exhaust filter
Intake/Exhaust unit	Direct-type turbine fan, 2x7.5KW, SIEMENS motor
Air volume	28,000m^3/h
Empty loaded air speed	0.25m/s
Heats	120kw heat
Maximum working temperature	80ºC
Controls	CE standard control box
Inverter	Inverter control
Stack light	Yes.
Heat recuperator	Option
Rated power	20KW

 

4.DETAILS

BOOTH STRUCTURE (SPRAY BOOTH)

• 350mm high metal base sunken in the ground
• Wall panels vertically installed
• 600mm plenum

OPTION

• We can customize the basement to specially meet your workshop requirements.

4-LEAF ENTRY DOOR & ELECTRIC DIVIDER DOOR (SPRAY BOOTH)

• Entry door with big safety glass windows and panic latch
• LED lamps, IP55 protection grade lighting fixtures

AIR MAKEUP UNIT (SPRAY BOOTH)

• 2*7.5kw fan unit, SIEMENS motor
• 28,000m³/h air volume, 0.28m/s empty loaded air speed
• Damper (for painting and baking phase)
• 232kw heat exchanger, RIELLO RS5D gas burner

HEAT RECUPERATOR
Working principle
The device is an additional device for spray booths used in cold areas, which is for recycling waste heat.
The temperature of the exhaust gases from heating painting is higher than that of outdoor fresh air. Fresh air drawn in by the intake fan is 0ºC or below 0ºC. In cold areas where the temperature is below 0ºC, the heating system needs to work more frequently, which results in more energy consumption. However, when using heat of the waste gases to heat the fresh air, it does not require additional energy, which greatly saves energy and improves the energy efficiency. It is an excellent green and environmental heating device.
 

Items	Parameters detected at the lower temperature end	Parameters detected at the higher temperature end
Airflow	28,000m^3/h	28,000m^3/h
Air inlet temperature	-5ºC	23ºC
Air inlet humidity	50	10
Air outlet temperature	9.4ºC	7.1ºC
Air outlet humidity	17	28
Pressure loss	511Pa	436Pa
Temperature efficiency	51%	57%
Internal air speed	8.07m/s	8.07m/s
Condensate water volume	0kg/h
Exchange energy	148,380w

CAR PREP STATION
- 600mm plenum
- Flat ceiling lighting fixtures
- Intake and exhaust fan unit, 2*5.5kw
- Extraction
 Option A: extraction through exhaust plenum chambers at the back
 Option B: extraction through base with grids in the ground
- Electrical and tool cabinets on the rear wall
- Electric soft curtain door in the front and as divider

ELECTRIC SOFT CURTAIN DOOR

FAQ

Q: How long is the production lead time?

A: 20 days from advance payment received for standard spray booths.
For non-standard projects, we will have to check the schedule case by case.
 

Q: How long is the warranty?

A: 2 year warranty for main components, not including consumables.
 

Q: Where is your factory located?

A: Baiyun, Guangzhou, 15 minutes' drive from the airport. Welcome to visit us at the factory.
 

Q: With the heat recuperator, can I put the machinery at the top of the spray booth?

A: Yes, it is still okay.
 

Q: For the heat recuperator, does the fresh air and exhaust air will contact with each other?

A: According to the design, the air is forced to pass through the heat exchanger core, two air streams (i.e. fresh air and exhaust air) never come into direct contact, avoid the transfer of any smell and moisture.
 

Q: How long can the spray booth serve?

A: If the booth can be maintained regularly and properly, the common service time of the spray booth is 7-10 years.