Infitech Automotive Refinish Paint Preparation Room & Prep Station/Prep Area & Painting Room

• Type: Spray Booth
• Certification: CE
• Substrate: Steel
• Coating: Powder Coating
• Airflow Direction: Fully Undershot-type
• Paint Mist Treatment: Dry-type
• Model NO.: IT-509
• Condition: New
• Plenum Height: 600mm
• Walls: 50mm Rock Wool Panel
• Lighting: LED Lamp
• Brightness: > 1,000lux
• Filter: High Efficiency Filters
• Fan: Direct Drive Fan, 11kw Motor
• Air Volume: 35,000m3/H
• Empty Loaded Air Speed: +/- 0.35m/S
• Controls: Ce Standard Control Box
• Warranty: 2 Years
• Transport Package: Polyfoam and Metal Frame
• Specification: 7110 X 5760 X 3810mm
• Trademark: INFITECH
• Origin: Guangzhou, China
• HS Code: 8419899090
• Production Capacity: 900 Sets/Year

Product Description

INFITECH automotive refinish paint preparation room & prep station/prep area & painting room

Design




Technical parameters
 

Item 1: Preparation bay
Design standard	BS EN 13355: 2004 + A1: 2009 BS EN 60204: 2006 + A1: 2009
Airflow	Full downdraft
Internal dimensions	6500×4000×2800mm (L×W×H)
External dimensions	8460×4000×3810mm (L×W×H)
Basement	350mm high, full grids, 900kg/wheel
Ceiling lighting	8 sets, each 4 X 18W, 576W total
Brightness	> 800Lux
Exhaust system	1×5.5KW, 970RPM, 380V, 50HZ, SIEMENS motor
Air volume	18,000m^3/h, 650pa
Filters	Floor filter: Fiberglass filter Exhaust filter: Fiberglass filter
Controls	Fan start, emergency stop switch, lighting, failure indication
Electrical & Tool cabinets	Yes.
Special item	Rated power: 6.5KW

Item 2: Paint baking booth with direct-fired heating system
Design standard	BS EN 13355: 2004 + A1: 2009 BS EN 60204: 2006 + A1: 2009
Airflow	Full downdraft for spray and cure
Internal dimensions	7000 X 4000 X 2800mm (L X W X H)
External dimensions	7110 X 5760 X 3810mm (L X W X H)
Plenum height	600mm
Basement	350mm high, full grids, 900kg/wheel
Entrance door	1 set, 3200 X 2700mm (W X H), manual door
Divider door	1 set, 6000 X 2400mm(B X H), electric plate roll-up door
Personnel door	1 set, 800 X 2000mm (W X H)
Ceiling lighting	10 sets, each 4 X 18W, 720W total
Sidewall lighting	4 sets, each 4 X 18W, 288W total
Brightness	> 1,000Lux
Filters	Pre-filter, ceiling filter, floor filter, exhaust filter
Intake system	11KW, 970rpm, 380V, 50Hz, SIEMENS motor
Exhaust system	11KW, 970rpm, 380V, 50Hz, SIEMENS motor
Air volume	35,000m^3/h
Equipment empty loaded air speed	+/- 0.35m/s
Noise	<78db
Heats	Direct fired heating system
Maximum working temperature	80°C
Controls	CE standard control box
Special item	Rated power: 24KW

Item 3: Mixing room
Design standard	BS EN 13355: 2004 + A1: 2009 BS EN 60204: 2006 + A1: 2009
Internal dimensions	3000 X 3000 X 2800mm (L X W X H)
External dimensions	3100 X 3100 X 2850mm (L X W X H)
Entrance door	1 set, 800 X 2000mm (W X H)
Ceiling lighting	2 sets, each 4 X 18W, 144W total
Filters	Pre-filter, exhaust filter
Ventilation system	1.5KW, 1450RPM, 380V, 50Hz, SIEMENS motor
Air volume	3,500m^3/h
Controls	CE standard control box
Special item	Rated power: 2KW

Features

Airflow • Full downdraft airflow for spray and cure • Controlled airflow ceiling	Construction • White pre-coated galvanized steel • Dual-skin insulated panels filled with rock wool, 50mm thick • 600mm high plenum
Doors • Manual door, 3 wing entry door (2 + 1 structure) • Personnel door with observation window	Air handling unit • Intake and exhaust motors, 11kw, SIEMENS motor • Direct fired heating system
Filtration • Pre-filter: G3 grade pre-filter bag filter • Ceiling filter: F5 grade filter cotton, Model SP-600G • Floor filter: G2 grade fiberglass paint arrestor filters • Exhaust filter: Simple activated carbon filter mat, M type	Controls • Standard Y/Δ step-down start control system •PLC control, higher reliability, lower failure rate •Painting, heating painting, flash-off, baking, lighting, emergency stop switch, failure indication, cooling, motor overload and over-current protection, fan and heating system interlock control, over-temperature alarm indication
Electric plate roll-up door (Divider door between prep bay and spray booth)   Door filled with polyurethane foam, with reinforced ribs; With observation window; Anti-crash protection device; Anti-sagging device.	Trolley (Greatly facilitates the movement of vehicle from one work area to the next)   Material of the trolley: High strength galvanized steel plate Trolley surface: With strong friction, convenient to load cars UNICASE design of the trolley: easy to load and unload cars, aesthetic

Picking and loading




Engineering case






Company information
Guangzhou Infitech is professional manufacturer of customized European standard spray booths in China. We stick to European standard for spray booth since the business started. What we supply ranges from initial design and layout, technical consultation, manufacturing through to installation and maintenance. We pride ourselves in delivering customized products that suit your customers' individual needs.