Customization: | Available |
---|---|
Warranty: | 2 Years |
Certification: | CE |
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Design standard | BS EN 13355: 2004+A1:2009 BS EN 60204: 2006+A1:2009 |
The internal dimensions | 20000 X 7000 X 5000(L X W X H) |
The external dimensions | 20120 X 11630 X 6000(L X W X H) |
Base design form | Without pits, with exhaust air collection cabinets on both sides |
Filter area | 28.8m2 |
Plenum height | 1000mm |
Wall panel | 60mm wall panel, wallboard filler material: heat-resistant rock wool panel |
Top panel | 50mm wall panel, wallboard filler material: heat-resistant rock wool panel |
Entrance door | With anti-sagging device |
Door type | Manual door, 3+3 structure |
Door size | 6400 x 4800 mm (W X H) |
Door arrangement and quantity | 1 set |
Door descriptions | Containing frame |
Presonnel door | |
Door type | Frame structure |
Door size | 800 x 2000 mm (W X H) |
Quantity | 2 sets |
Door descriptions | With safety glass viewing window |
Sidewall lighting | 20 sets of light fixtures, each 2 X 36W, total 1440W |
Lighting descriptions | Protection class IP55, CE certified electronic ballasts, OSRAM lamp |
Ceiling door | 26 sets of light fixtures, each 4 X 36W, total 3744W |
Lighting description | Protection class IP55, CE certified electronic ballasts, OSRAM lamp |
Illumination | > 800Lux |
Filtration system | Pre-filter, Ceiling filter, Exhaust filter |
Intake/Exhaust system | 4 X 11KW, 970rpm, 400V, 50Hz, CE |
Parameter of fan | 4X35000m3/h, 650pa |
Total air volume | 140000m3/h |
Equipment empty loaded air speed | +/- 0.27m/s |
Noise | <78 db |
Heating system | |
Heat exchanger | Stainless steel 1Gr18Ni9Ti (SUS304) |
Heat power | 232KW |
temperature increase capability | 20ºC (from -10ºC to 10ºC under painting status) |
Maximum operating temperature | 80ºC |
Heating time | 15-30 minutes (from 20ºC to 60ºC under baking status) |
Gas burner | RIELLO RS5, Gas burner |
Contral system | |
Performance standard | Standard Y/Δ drop step-down start control system |
Function | Painting, warm painting, baking, lighting, emergency stop switch, failure indication, over-temperature alarm indication |
PLC | yes |
Inverter control | Optional |
Pressure detection | With pressure gauge to indicate pressure of the cabin. |
Distribution facilities | CE standard electric cable, electric connector, wire tube and step line |