DESIGN STANDARD |
BS EN ISO 12100:2010, BS EN ISO 13355:2016 BS EN ISO 13849-1:2015, BS EN ISO 4414:2010 BS EN 60204-1:2018 |
BOOTH DIMENSIONS |
|
Internal dimensions |
6900 X 4000 X 2800mm (L*W*H) |
External dimensions |
7010 X 5570 X 3810mm (L*W*H) |
BASEMENT |
|
Base design |
Galvanized sheet bending forming, full grids Basement(H): 350mm, basement height can be adjusted |
Carrying capacity of the grids |
800kg/wheel |
Filter area |
28m2 |
Drive-in-ramps |
full ramps: 3 pieces; size: 2000 X 1030 X 330mm, diamond structure |
Grid description |
Size: 997 X 756mm, 40 X 3mm, galvanized pressed steel grates instead of conventional steel grates with twisted bars. Aesthetics, durability, stress resistance are the most important features of pressed steel grates. |
CABIN |
|
Cabin structure |
Wall panel vertical insert, left side with full glass. |
Plenum height |
600mm |
WALL PANEL |
|
Wall panel |
50mm dual-skin insulated panels filled with heat resistant rock wool substrate thickness: 0.426mm |
Top panel |
Single-layer galvanized steel plate bending forming |
Edge material |
1.0mm galvanized steel plate bending forming |
ENTRANCE DOOR |
|
Form |
Manual door, 3 wing entry door (2 + 1 structure) |
Size |
3200 X 2700mm (W*H) |
Quantity |
Product entry door, 1 set |
Door description |
Containing frame, with safety glass observation window |
PERSONNEL DOOR |
|
Form |
Frame structure |
Size |
800 X 2000 mm (W*H) |
Quantity |
1 set |
Door description |
With safety glass observation window |
CEILING LIGHTING |
|
Quantity and power |
8 sets of light fixtures, each 6 X 24W, 1152W total |
Lighting arrangement |
On both sides |
Lighting description |
LED lamp, protection grade IP55 |
SIDEWALL LIGHTING |
without |
Brightness |
> 1,000Lux |
FILTRATION SYSTEM |
|
Pre-filtration |
G2 grade pre-filter bag filter |
Ceiling filter |
F5 class filter cotton, Model SP-600G |
Floor filtration |
Fiberglass paint arrestor filters |
Extract filtration |
Simple activated carbon filter mat, M type |
INTAKE SYSTEM |
|
Intake fan |
Direct-type turbine fan |
Power and motor description |
7.5KW, 970rpm, 380V, 50Hz, CE approved motor |
Parameter of intake fan |
28,000m3/h, 650pa |
EXHAUST SYSTEM |
|
Exhaust fan |
Direct-type turbine fan |
Power and motor description |
7.5KW, 970rpm, 380V, 50Hz, CE approved motor |
Parameter of exhaust fan |
28,000m3/h, 650pa |
Empty loaded air speed |
+/- 0.27m/s |
NOISE |
<78dB |
HEATING SYSTEM |
|
Heat exchanger material |
Stainless steel 1Gr18Ni9Ti(SUS304) |
Heat exchanger power |
232KW |
△ T temperature increase capability |
25° C (from -5°C to 20°C in painting phase) |
Max. working temperature |
80°C |
Heating time |
8-10 minutes (from 20°C to 60°C in baking phase) |
Burner model |
RIELLO diesel burner RG5D (two stage) |
DUCTWORK |
|
Straight ducting |
8 pcs, 3 pcs for air inlet, 5 pcs for air outlet |
90°elbow |
2 pcs, for air inlet |
Cowl |
1 pc, for air outlet |
Reducer |
2 pcs |
MANUAL DAMPER |
1 pc |
ELECTRIC DAMPER |
1 pc |
CONTROL SYSTEM |
|
Implementation standard |
Standard Y/Δ step-down start control system |
PLC programmable logic controller |
PLC control, higher reliability, lower failure rate |
Touch screen control system |
User friendly interface featuring touch screen and switches, easy to operate |
Pressure detection |
Pressure gauge indicates pressure inside the booth. |
Features |
Painting, heating painting, flash-off, baking, lighting, emergency stop switch, failure indication, over-temperature alarm indication, motor overload and over-current protection, fan and heating system interlock, automatic constant pressure. |
Stack light |
4 colors
- Green: Spray Mode
- Blue: Flash-off
- Yellow: Baking Mode
- Red: Failure Alarm
When baking is over, buzzer alarms. |
SPECIAL ITEM |
Rated power: 20KW |
OPTION |
|
SIEMENS motor |
SIEMENS motor instead of the Chinese brand CE motor |
Drive-in-ramps |
3 pieces; size: 2000 X 1030 X 330mm, diamond structure |