Non-Standard Paint Booth Spray Booth Paint Spray Booths for Furniture Painting

• After-sales Service: 24 Hours After Service
• Warranty: 2 Years
• Type: Spray Booth
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: Non-standard
• Certification: CE
• Substrate: Steel
• Brand: Infitech
• Coating: Powder Coating
• Airflow Direction: Rear Semi Downdraft
• Heating Mode: Hot Water Heating System
• Paint Mist Treatment: Dry-type
• Condition: New
• Plenum (Height): 600mm
• Extraction Area: 9.6m2
• Walls: 50mm Rock Wool Walls
• Brightness: >1,000lux
• Air Volume: 28,000m3/H
• Empty Loaded Air Speed: 0.16m/S
• Heats: Hot Water Heating System
• Maximum Working Temperature: 80 Celsius
• Noise: <78 dB
• Stack Light: Yes
• Rated Power: 15kw
• Heat Recuperator: Yes.
• Transport Package: Cargo Loaded on Steel Frame Handled by Forklifts
• Specification: 8000 X 6000 X 2650mm (L X W X H)
• Trademark: INFITECH
• Origin: Guangzhou, China
• HS Code: 8419899090
• Production Capacity: 1000 Sets/Year
• Package Size: 1600.00cm * 230.00cm * 230.00cm
• Package Gross Weight: 5600.000kg

Product Description

Product Description

 

Paint Booth Spray Booth Paint Spray Booths For Furniture Painting

1.FEATURES
The solution comes with 1 paint booth and 1 paint mixing room. It is specially designed for painting and drying carpentry.
The paint booth has rear semi downdraft airflow, manual sliding door, and air handling unit and heating unit installed at the top. The heating is hot water heating, which is environmental. Meanwhile, it is with heat recuperator, so the cold fresh air can be pre-heated to certain temperature by the heat of the waste gases, which helps save energy.
Please feel free to send your inquiries. We will prepare and provide you with the ideal paint booth solution that best suits your requirements for your review then.

Product Parameters

 

2.SPECIFICATIONS

Paint Spray Booth
ITEMS	Paint Booth Spray Booth Paint Spray Booths For Furniture Painting SPECIFICATIONS
Product	IT-L8-W6 Carpentry Paint Booths
Design standard	BS EN 13355: 2004 + A1: 2009 BS EN 60204: 2006 + A1: 2009
Internal dimensions	8000 X 6000 X 2650mm (L X W X H)
External dimensions	8110 X 6720 X 4870mm (L X W X H)
Airflow	Rear semi downdraft
Plenum (height)	600mm
Extraction	Through rear exhaust plenum chambers
Extraction area	9.6m^2
Entrance door	2000x2200mm (WxH), manual sliding door, 2 sets
Service door	800x2000mm(WxH), 1 set
Walls	50mm rock wool walls
Ceiling lights (LED)	10 sets, each 6 X 18W, 1,080W total
Sidewall lights (LED)	12 sets, each 2 X 18W, 432W total
Brightness	>1,000LUX
Filters	Bag filter, high efficiency ceiling filter, filter at exhaust plenum chambers, exhaust filter
Intake/Exhaust unit	Direct-type turbine fan,2x7.5KW, SIEMENS motor
Air volume	28,000m^3/h
Empty loaded air speed	0.16m/s
Heats	Hot water heating system, power: 450KW
Maximum working temperature	80ºC
Heat recuperator	Yes.
Controls	CE standard control box
Inverter	with inverter
Special item	Machinery mounted at the overhead steel platform
Rated power	15KW

Detailed Photos

 

3.DETAILS

Manual sliding door

• Slide door with durable rubber for airtight seal
• With tempered observation window on all doors

Air handling unit and heating unit
 

Intake motor	Exhaust motor	Intake / Exhaust fan	Air volume	Drying system
7.5KW SIEMENS	7.5KW SIEMENS	IT750 backward centrifugal fan, direct linkage	28,000m³/h	Hot water heating

The heat exchanger is made of copper pipe and aluminum sheet.
Heat exchanger power: 450KW
Air volume to be handled: 28,000m³/h
Intake air temperature: -10ºC
Outtake air temperature: 38ºC
Temperature of water at the hot-in port: 85ºC
Temperature of water at the hot-out port: 75ºC
Water flow: 38t/h

Heat recuperator

The heat recuperator is designed for spray booths used in cold areas. It makes full use of the heat of the waste gases to pre-heat the cold fresh air. This helps save energy consumption.

Cross flow heat exchanger core is made of antiseptic hydrophilic / epoxy coating aluminum foil and galvanized sheet cover. The air is forced to crossover through the heat exchanger core, two air streams (i.e. fresh air and exhaust air) never come into direct contact, avoid the transfer of any smell and moisture. It is usually being used for recovering energy at residential, commercial and wind-power industry ventilation systems.

Control

Certifications

 

 

Company Profile

 

Factory image:


Packing and loading:

FAQ

 

FAQ

Q: Can you also supply prep station for carpentry?

A: Certainly. Tell us your requirements. We will prepare and send you the corresponding solution for you to check.
 

Q: Is your paint booth CE compliance?

A: Yes.
 

Q: I need to integrate water curtain together with paint booth.

A: That's okay. Please send us the draft sketch of the equipment. We will design according to your requirements.
 

Q: Can you propose the right spray booth to me? I will send you the information of the products that I plan to paint.

A: Sure. For the information of the products, please advise the maximum dimensions, weight, and paints that you will use etc. Meanwhile, also send us the workshop layout for our reference.
 

Q: Can you supply cross draft spray booth?

A: Yes. It is available.
 

Q: Can you add hanging brackets to the paint booth?

A: That's okay. But you need to send us the maximum loading capacity for our reference.