| Type: | Coating Production Line |
|---|---|
| Certification: | CE |
| Substrate: | Steel |
| Coating: | Powder Coating |
| Airflow Direction: | Fully Undershot-type |
| Heating Mode: | Diesel |
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier | DESIGN STANDARD | BS EN 13355: 2004 + A1: 2009 BS EN 60204: 2006 + A1: 2009 |
| BOOTH DIMENSIONS | |
| Internal dimensions | 15000 X 5000 X 5000mm (L X WX H) |
| External dimensions | 15170 X 7120 X 5800mm (L X WX H) |
| BASEMENT | |
| Basement design type | Full downdraft, one row of grids in the middle (need to dig 800mm deep pit for return air) |
| Carrying capacity of the grids | 900kg/wheel |
| Filter area | 10.5m2 |
| Grid description | Size: 997X 756mm, 40X3mm, galvanized pressed steel grates instead of conventional steel grates with twisted bars. Aesthetics, durability, stress resistance are the most important features of such steel grating. |
| CABIN | |
| Cabin structure | 80 x80 3.0 thick square tube frame, gantry structure Wall panel horizontal insert |
| Plenum height | 800mm |
| WALL PANEL | |
| Wall panel | 60mm dual-skin insulated panels filled with heat resistant rock wool |
| Top material | 50mm dual-skin insulated panels filled with heat resistant rock wool |
| Edge material | 1.2mm galvanized plate bending forming |
| ENTRANCE DOOR | |
| Form | Manual door, 4 wing entry door (3+1 structure) |
| Size | 4270 X 4800mm (W X H) |
| Quantity | Product entry door, 1 set |
| Door descriptions | Containing frame , with safety glass observation window |
| PERSONNEL DOOR | |
| Form | Frame structure |
| Size | 800 X 2000 mm (W X H) |
| Quantity | 2 sets ***4 sets as optional |
| Door description | With safety glass observation windows |
| SIDEWALL LIGHTING | (LED lamp) |
| Quantity and power | 18 sets of light fixtures, each 4 X 18W, total 1296W |
| Lighting arrangement | On both sides |
| Lighting description | Protection grade IP55 |
| CEILING LIGHTING | (LED lamp) |
| Quantity and power | 20 sets of light fixtures, each 4 X18W, total 1440W |
| Lighting arrangement | On both sides |
| Lighting description | Protection grade IP55 |
| Brightness | > 1000Lux |
| FILTRATION SYSTEM | |
| Pre-filtration | G3 grade pre-filter bag filter |
| Ceiling filter | F5 class filter cotton, Model SP-600G |
| Floor filtration | Fiberglass paint arrestor filter |
| Extract filtration | Activated carbon filter mat, M style |
| INTAKE SYSTEM | |
| Intake fan | Direct-type turbine fan |
| Intake fan power and motor description | 2X11KW, 970rpm, 380V, 50Hz, CE |
| Parameter of intake fan | 2 X 35,000m3/h, 650pa |
| EXHAUST SYSTEM | |
| Exhaust fan | Direct-type turbine fan |
| Exhaust fan power and motor description | 2X11KW, 970rpm, 380V, 50Hz, CE |
| Parameter of exhaust fan | 2 X 35,000m3/h, 650pa |
| Equipment empty loaded air speed | +/- 0.26m/s |
| NOISE | <78db |
| HEATING SYSTEM | |
| Heating exchanger material | Stainless steel 1Gr18Ni9Ti(SUS304) |
| Heating exchanger capacity | 2 X 232KW(340,000Kcal/H) |
| △T temperature increase ability | 25° C (from -5°C to 20°C, in painting phase) |
| Maximum working temperature | 80° C |
| Burner Model | RIELLO RG5D X 2 |
| Heating Time | 10-18 minutes (from 20° C to 60° C) in baking phase |
| DUCTWORK | |
| Straight ducting | 20 pieces |
| Rain hat | 2 pieces |
| 90°elbow | 2 pieces |
| 45°elbow | 2 pieces |
| Reducers | 4 pieces |
| Manual damper | 2 pieces |
| Electric damper | 2 pieces |
| CONTROL SYSTEM | |
| Implementation standards | Standard Y/Δ drop starting control system |
| PLC programmable logic controller | PLC control, higher reliability, lower failure rate |
| Pressure detection | The pressure gauge indicates pressure inside the booth. |
| Power distribution facilities | CE standard electric cable, terminal box, wiring tubes and accessories |
| Features | Painting, heating painting, flash-off, baking, emergency stop switch, failure indication, baking delay stop protection, motor overload and over-current protection, over-temperature alarm indication, fan and heating system interlock control |
| OPTIONAL | |
| 3 axis lifter with platform | It allows painter to reach all around the workpiece, greatly increase efficiency and save labor cost. |
|
Inverter control
|
Inverter control, energy-saving, more economical |
|
Touch screen control system
|
Touch screen control, easier to operate |
|
Overhead steel platform
|
|
|
Fireproof rolling shutter door
|
|
|
Plate roll-up door
|
|
| Special item | Rated power: 50KW |
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}